Vi3W
Skip to content

Guides

Free video to 3D model AI: every free tier, and where each one stops

Free video-to-3D tools compared: Polycam, Postshot, Scaniverse, KIRI, Rokoko, DeepMotion and Plask, with each free limit, export and licence.

5 min read

A flat photo of a wooden rocking horse standing beside the same rocking horse as a solid 3D object
Illustration. Free video tools can get you from footage to an object, as long as you know where each free tier ends.

Quick answer

Is there a free AI that turns video into a 3D model?

Yes, with limits. Polycam's free plan takes videos up to three minutes and exports GLTF. Postshot trains splats from unlimited video for free, but can't export them on that plan. For animation, Rokoko Vision, DeepMotion and Plask give a few free seconds of mocap. For a new model, a still frame through a free image-to-3D tool works too.

At a glance

Free tiers of video-to-3D and video-to-motion tools, from each vendor's own pages, checked November 21, 2026. "Check" marks conflicting or unconfirmed details.
ToolFree limitWhat you can export for freeCommercial use on free
Polycam3 AI + 10 photogrammetry captures; 150 images; 3-minute videosGLTF onlyunknown
Jawset PostshotUnlimited images and video; renders up to 4KNo PLY or SPZ exportNo (non-commercial, watermarked)
Scaniverse (classic app)Free on-device splat capturePLY, SPZcheck
KIRI Engine (Basic)Photo scans up to 150 photos / 2 GB; video input not listed (check)OBJ, FBX, STL, GLBunknown
Rokoko Vision (Studio Starter)30 seconds of video a monthFBXNot stated
DeepMotion Animate 3D60 seconds of animation a monthFBX, BVH, MP4No (personal use only)
Plask Motion15 seconds of mocap a day; 1 GBFBX, GLB, BVHunknown
Move AI (Move One)Videos up to 30 seconds; one-time credits (check)unknownunknown
Vi3W (from a still frame)TRELLIS is the free default modelGLB, FBX, OBJ, STL, PLY, glTFcheck

What "free" gets you, honestly

Free video-to-3D tools exist, but each one stops somewhere: at a time cap, a capture count, a missing export button or a non-commercial licence. Free tiers that let you see a 3D result are easy to find. Ones that let you download and use it are much rarer. This page goes through each free tier and where it stops, so you can pick the one whose limit you can live with.

For the bigger picture of what video can turn into (a scan, a world or motion), start with video to 3D with AI.

Free tools that turn video into a scan

Polycam: the free tier that exports

Polycam's free plan accepts videos up to 3 minutes per capture, with 3 AI captures and 10 photogrammetry captures, and up to 150 images. The catch: free export is GLTF only, and Gaussian splats need the Basic plan. For a single object you want as a mesh, that's still the most usable free route on this list.

Postshot: free to train, not to export

Jawset's Postshot trains Gaussian splats from images or video, with unlimited video length on the free plan and renders up to 4K. But the free plan is non-commercial, watermarked and can't export PLY or SPZ, and its saved files only open in the free version. It's good for learning and previewing, but you'll hit a wall when you want the file. It needs Windows 10+ and an NVIDIA RTX 2060 or better.

Scaniverse and KIRI Engine: phone capture instead of a video file

These work from your phone's camera rather than an uploaded clip. Scaniverse's classic app is free, captures splats on the device and exports PLY and SPZ. The newer cloud version has a credit-limited free plan. KIRI Engine's free Basic plan covers photo scans up to 150 photos or 2 GB, plus LiDAR, with unlimited exports in OBJ, FBX, STL and GLB. Its pricing page doesn't mention video input, and its splat-with-mesh scanning and 3DGS-to-mesh tools are Pro ($79.99 a year).

A brass lantern whose left half is a cloud of glowing splats and whose right half is a solid mesh with a blue wireframe
Illustration. Most free tiers give you the splat half. The mesh half is where the paywalls start.

Free tools that turn video into animation

If you filmed a person and want their movement on a 3D character, you need markerless motion capture. The free tiers are small but real:

  • Rokoko Vision, Studio Starter plan: 30 seconds of video processing a month, unlimited FBX export and 5 text-to-motion clips. Commercial use of Vision output isn't stated.
  • DeepMotion Animate 3D: 60 seconds of animation a month with no card needed. Exports FBX, BVH and MP4, but it's for personal, non-commercial use only.
  • Plask Motion: 15 seconds of mocap a day and 1 GB of storage, with FBX, GLB and BVH export.
  • Move AI, Move One: videos up to 30 seconds with one-time credits. Its official help pages conflict, so check the current terms.
  • QuickMagic has a free plan, but its pricing page wasn't reachable when we checked, so confirm the limits yourself.
  • Tencent FlowHMR is open source and turns video into FBX motion on a consumer GPU with 12 GB or more. No monthly cap, but you set it up yourself.

Keep clips short and well lit, with the whole body in frame, so the free seconds go further. Then apply the motion to a rigged character, as covered in AI 3D animation.

The free frame-grab route

If what you want is a model of something in the video rather than a scan of the scene, skip the video tools entirely:

  1. Pause on the sharpest frame where the object is fully visible.
  2. Export or screenshot it at full resolution.
  3. Run it through a free image-to-3D generator. Our list of free AI image-to-3D generators compares them.

You get a clean single object instead of a scan full of background. The trade-off is that the hidden sides are inferred, not captured. If accuracy to the real object matters, as it does for a replacement part, use a capture app instead. Photogrammetry vs AI image to 3D explains the difference.

Which free tier to pick

  • You want a mesh of a real object to download today: Polycam's free plan (GLTF export).
  • You want to see whether a place will splat well: Postshot's free plan, then pay only if it's worth exporting.
  • You're on a phone and want splat files: Scaniverse's classic app (PLY, SPZ).
  • You want a short dance or gesture on a character: Rokoko Vision or Plask. Use DeepMotion only for personal projects.
  • You need a lot of motion and have a 12 GB GPU: FlowHMR.
  • You want a new model of something in the clip, not a scan: a still frame and an image-to-3D tool.

Where Vi3W fits

Vi3W doesn't take video, and it doesn't make splats or scans. It handles the frame-grab route. Upload the still, pick one of 25 image-to-3D models (TRELLIS is the free default, and others such as Meshy, Tripo, Rodin and Hunyuan 3D show their cost first), and download the result as GLB, FBX, OBJ, STL, PLY or glTF. Downloads are free. It runs in the browser with no GPU. If the model should move, Add bones rigs it and Make it move applies a preset or described move from a motion library. That's not motion taken from your video, so pair it with a mocap tool above if you need the exact performance.

Start from a frame

Grab the clearest frame from your clip and turn it into a model with the free default. Try Vi3W.

Frequently asked questions

video to 3d model ai free

For a scan of a real object, Polycam's free plan is the one that both takes video and exports a model (GLTF). For a new model of something in the clip, export a sharp frame and run it through a free image-to-3D tool such as Vi3W, where TRELLIS is the free default.

video to 3d ai free

It depends on the output. For scans, try Polycam's or Scaniverse's free app. For splats you only need to view, Postshot's free plan. For motion, the free tiers of Rokoko Vision, DeepMotion or Plask. Check each free tier's commercial terms before publishing anything.

video to 3d model ai free online

Most free video-to-3D options are apps you install. If you'd rather stay in the browser, export a frame from the video and use a browser-based image-to-3D tool. Vi3W runs in the browser with no GPU needed.

convert video to 3d animation ai free

Rokoko Vision gives 30 seconds a month free with FBX export. DeepMotion gives 60 seconds a month for personal, non-commercial use. Plask gives 15 seconds a day. Tencent's open-source FlowHMR has no cap if you have a 12 GB GPU, and outputs FBX.

Last reviewed