Vi3W
Skip to content

Guides

Auto-rig an AI-generated character through MCP, from one chat

Auto-rig an AI-generated character from a Claude or ChatGPT chat over MCP: prep, humanoid and animal rigs, moves, checks and exports.

6 min read

A low-poly faceless mannequin with glowing bones and joints visible through a translucent body
Illustration. An auto-rig places the skeleton and the skin weights in one pass.

Quick answer

How do you auto-rig a character through MCP?

Connect a 3D tool that can rig to your AI assistant as an MCP server, then ask in plain words. With Vi3W connected to Claude or ChatGPT, "add bones, it's a person" or "it's an animal" runs an automatic rig on the model, and a follow-up adds a move. Download the rigged GLB or FBX and check it in Blender.

Why do the rig in a chat at all?

Auto-rigging was already a button in several tools. The reason to do it through MCP is the chain around it. A single conversation can generate a character, rebuild the mesh at a game-friendly size, rig it, add three moves, export FBX, and in Claude Code drop the file into your Unity project. Each step on its own is easy. Doing them in sequence by hand is what eats an afternoon.

This guide walks through that chain with Vi3W's MCP server, then shows how to check the rig in Blender. For rigging without an assistant, how to rig an AI-generated character covers Mixamo, Rigify and manual armatures.

What you need

  • An MCP client: Claude (claude.ai, Claude Desktop or Claude Code) or ChatGPT on a plan with full MCP.
  • The Vi3W MCP server added as a custom connector. Setup is in image to 3D inside Claude.
  • Blender (optional, but you'll want it for checking).
  • A character in a neutral pose. This is the one thing you can't skip.

Step 1: generate for rigging, not for a poster

Most AI characters are generated in dramatic poses because the reference image was made to look good. Auto-riggers hate that. Ask for a rig-friendly pose from the start:

"Generate a stylised goblin merchant, full body, A-pose with arms 30 degrees from the body, legs slightly apart, hands open, facing the camera, plain grey background, no props in hands."

The details that matter: arms away from the torso, legs apart, open hands, nothing held, nothing covering the joints. A long cloak or a huge backpack will get bones too.

For a creature: "Four-legged wolf, side-on standing pose, all four legs visible and apart, tail straight out, plain background."

Step 2: check and lighten the mesh

Ask for numbers before you rig:

"How many faces does the goblin have? Rebuild it at about 10,000 faces with Clean shape."

Clean shape rebuilds the mesh to a target between 500 and 20,000 faces and bakes the textures onto it. A lighter mesh rigs faster, deforms more predictably and runs better in a game. For a mobile game, try 5,000. For a PC game hero, keep it nearer 20,000 and consider hand retopology later. Topology for animated AI characters explains why edge flow at the joints matters.

Step 3: add bones

"Add bones to the goblin. It's a person."

"Add bones to the wolf. It's an animal."

Humanoid is the default rig. The animal option uses a creature rig built for four-legged and other non-human bodies, which is what Mixamo can't do. The cost appears in the Vi3W app before you run it.

Step 4: add moves

"Make the goblin idle, then walk, then wave."

Make it move has six presets (Idle, Walk, Run, Jump, Wave, Dance) and also takes a described motion that it matches to a clip library: "a short hop", "kick", "punch", "cheer". If nothing matches, it asks you to try simpler words.

Walk and Run come with the rig at no extra cost. Every other move re-rigs the model, so finish all shape and paint changes before you start adding moves.

Step 5: export for your engine

"Give me the goblin as FBX with all its animations."

FBX is the safe choice for Unity and Unreal. GLB works for Godot, the web and Blender. In Claude Code you can go one step further: "download it into Assets/Characters/Goblin/ and write a Unity editor script that builds an Animator Controller with Idle as the default state." The download is free in every format.

A wooden puppet whose limbs are linked to floating control rings
Illustration. Checking the rig means posing it, not just looking at the skeleton.

Step 6: check the rig in Blender

Never ship an auto-rig you haven't posed. In Blender:

  1. Import with File ‣ Import ‣ glTF 2.0 or FBX.
  2. Select the armature and enter Pose Mode (Ctrl+Tab).
  3. Stress the joints: rotate an upper arm up 90 degrees, bend a knee 90 degrees, twist the spine and the neck.
  4. Look for: collapsing armpits, knees that bend like a hose, hands or hair pulled by the wrong bone, the belt following the arm.
  5. Play the clips in the Action Editor. Watch for sliding feet and for a hitch at the loop point.

If you have Blender connected over Blender MCP, Claude can do the posing for you and screenshot each test: "Import goblin.fbx, pose the left arm straight up and the right knee bent 90 degrees, and screenshot front and side."

Bad deformation is nearly always a weight problem, and it's fixable without re-rigging. See fixing weight painting with Claude.

When the auto-rig fails

  • Arms move the torso. The arms were too close to the body. Regenerate in an A-pose, or fix the weights.
  • The skirt or coat tears. Long cloth needs its own bones or physics. Auto-rigs only give it body weights.
  • Fingers are fused. Mitten hands get one or two bones. Fine for background characters, not for close-ups.
  • The animal rig bends the wrong way. Unusual anatomy (six legs, a long neck, wings) is beyond a standard creature rig. Build a custom armature in Blender.

The Blender-only alternative over MCP

If you'd rather keep everything in Blender, Claude can run Rigify through Blender MCP: add a meta-rig, fit it, generate, and parent with automatic weights. It's slower and needs more checking, but you get a full control rig. Can Claude rig a character has the step-by-step prompts. Open research riggers like UniRig are another option if you run models locally.

What an auto-rig through MCP won't give you

  • No facial rig or lip-sync shapes.
  • No choice of bone naming or layout. If your engine needs a specific skeleton (Unreal Mannequin, Roblox R15), plan to retarget.
  • No hand-keyed performance. Library moves are generic. Your hero's signature attack still needs an animator.
  • No fix for a bad pose. Garbage in, garbage rig out. Step 1 matters most.

Run the chain once

Generate one A-pose character, Clean shape it, Add bones, Make it move with a walk, export FBX, and pose it in Blender. Do it once and you'll know where your project needs a human. Start in Vi3W.

Frequently asked questions

auto rig with ai

AI auto-riggers predict where joints sit in a mesh and compute skin weights automatically. You can run them in a web app, as Blender add-ons, or through an AI assistant over MCP, as this guide shows.

auto rig for animals

Most free auto-riggers, Mixamo included, only do bipedal humanoids. Vi3W's Add bones has an animal option for four-legged and other non-human bodies. In Blender, Rigify also ships animal meta-rigs you can fit by hand.

auto rig 3d model

Upload or generate the model in a neutral pose, run the auto-rig, then pose the result to test it. Most failures come from the mesh: fused limbs, a closed pose, or too many triangles.

auto rig with mixamo

Upload an FBX, OBJ or ZIP of a humanoid to Mixamo, place the chin, wrist, elbow, knee and groin markers, and download the rigged FBX. It's free with an Adobe ID and royalty-free for commercial use.

Last reviewed