Vi3W
Skip to content

Guides

Make a working car in Roblox Studio with constraints

Build a drivable Roblox car: chassis, HingeConstraint wheels, steering, VehicleSeat input, suspension, and putting a custom car body on top.

3 min read

A cartoon go-kart with glowing hinge discs at each wheel and a seat, driving on a low-poly road
Illustration. Hinges turn the wheels; a seat reads the driver.

Quick answer

How do you make a car that drives in Roblox Studio?

Build a chassis part, attach four wheel parts with HingeConstraints set to Motor, and add a VehicleSeat. A short script reads the seat's Throttle and Steer and sets the hinges' angular velocity and the front wheels' steering angle. Weld a visual car body on top, set it to Massless with collision off.

The parts of a working car

A go-kart chassis with four wheels and glowing hinge discs, shown exploded
Illustration. Chassis, hinged wheels, seat, then the body on top.
  • Chassis: an invisible base part everything attaches to
  • Wheels: four cylinder parts
  • HingeConstraints: one per wheel, so the wheels spin
  • Steering: the front hinges sit on small steering parts that turn
  • VehicleSeat: reads the driver's input
  • Body: the visual mesh, welded on top

Step 1: Chassis and wheels

  1. Make a flat chassis part about the size of your car. Leave it unanchored.
  2. Add four cylinder parts as wheels, rotated so they roll forward.
  3. Add an Attachment to the chassis and one to each wheel, at the wheel centre, both pointing along the axle.
  4. Add a HingeConstraint per wheel between those attachments.
  5. Set each hinge's ActuatorType to Motor, so a script can drive it.

Step 2: Steering

For the front wheels, put each hinge on a small steering part that's joined to the chassis by a second HingeConstraint pointing up, set to Servo. Changing its target angle turns the wheel left and right.

Step 3: The seat and the script

Add a VehicleSeat to the chassis. When a player sits, it exposes Throttle (−1, 0, 1) and Steer (−1, 0, 1). A short server Script:

  • Sets each drive hinge's AngularVelocity from Throttle, multiplied by a speed value
  • Sets each steering servo's TargetAngle from Steer, multiplied by a maximum angle
  • Sets MotorMaxTorque high enough to move the car

Roblox Assistant or an MCP-connected agent can write this from that description. Test and tune the numbers.

Step 4: Suspension (optional)

Put a SpringConstraint plus a PrismaticConstraint between chassis and wheel mounts for bounce. Start without suspension, then add it once driving works.

Step 5: The body

  1. Import your car body mesh. See Roblox car models.
  2. Position it over the chassis and weld it with a WeldConstraint (weld vs Motor6D).
  3. Set the body to Massless and CanCollide off, so it doesn't affect handling.
  4. Give it CollisionFidelity Box, or no collision (collision fidelity).
  5. Swap the wheel cylinders' look for wheel meshes, welded to the invisible wheels, or use the meshes as the wheels with Hull collision.

Common problems

  • Car won't move: something's anchored, or MotorMaxTorque is too low.
  • Car flips: centre of mass too high. Lower the chassis, widen the wheelbase, or make the body massless.
  • Wheels wobble: attachments aren't centred or aligned on the axle.
  • Car drives backwards: flip the sign on the throttle value, or the wheel attachments' direction.

Make the body in Vi3W

Vi3W turns a prompt, a photo or a sketch into a textured, retopologised car body (GLB, FBX or OBJ). Generate the wheel separately and reuse it four times. Vi3W makes the meshes only; the chassis and scripts are built in Studio. Make a car body in Vi3W.

Last reviewed