Vi3W
Skip to content

Guides

How do I convert a multi-part GLB into a printable STL without merging separate pieces?

Convert a GLB with separate parts into printable STL files in Blender while keeping pieces separate, plus slicer Split to Objects and 3MF.

6 min read

An exploded view of a small clay robot toy with its arms, head and body floating apart above a 3D printer bed

Quick answer

How do I convert a multi-part GLB into a printable STL without merging pieces that should stay separate?

Import the GLB into Blender, fix and check each part on its own, keep a gap between parts, then export. Either export one STL per part (STL Batch), or one STL with several disconnected shells and use your slicer's Split to Objects. Never run Merge by Distance across touching parts. 3MF keeps objects separate natively.

Can a single STL keep parts separate?

Yes, but only as separate shells, not as named parts. STL is a plain list of triangles with no objects, names or hierarchy. A single STL can still contain several disconnected pieces. Prusa's Split to objects/parts article puts it plainly: "STL files will always get imported as a single object, no matter how many separate shells are included in the file." Bambu Lab's wiki page on the same feature says the same for Bambu Studio.

So "keeping parts separate" in one STL means one thing: the shells must not touch, overlap or share vertices. If they stay disconnected, the slicer can split them again. If they get welded or intersect, they print as one lump.

That gives you three ways to convert a GLB with multiple separate parts into printable files:

  • One STL per part. Most robust. Nothing can merge by accident.
  • One STL, several disconnected shells. Works if you keep gaps between parts, then split in the slicer.
  • One 3MF. Prusa notes that 3MF supports multiple objects natively, each loaded as a separate entity.

Step 1: import the GLB and see how it's split

  1. In Blender, File ‣ Import ‣ glTF 2.0 (.glb/.gltf).
  2. Open the Outliner. A multi-part GLB usually arrives as several mesh objects, often under an empty parent. glTF stores sizes in metres (the glTF 2.0 specification says "the units for all linear distances are meters"), so check the dimensions in the sidebar (N).
  3. Delete what won't print: empties, cameras and lights. Select all meshes and press Ctrl-A ‣ All Transforms so the parent's scale and rotation are baked into each part.

If several parts came in as one object, select it, Tab into Edit Mode and use Mesh ‣ Separate ‣ By Loose Parts (P). The Blender manual describes it as creating "an object for every independent (disconnected) piece". The opposite problem, parts that should be one piece but aren't connected, is fixed by joining (Ctrl-J) and closing the gaps.

Step 2: decide which pieces stay separate

Before you touch the geometry, write a short list: which parts print as separate pieces (arms, head, a removable lid), and which belong together (a visor glued to a helmet). Rename the objects to match. This list stops you from reaching for "select all" in the next step.

Several separate grey printed parts laid out neatly with gaps between them on a 3D printer build plate
Illustration. Separate parts need separate shells with gaps between them, on screen and on the plate.

Step 3: clean up one part at a time

This is where accidental merging happens. Merge by Distance merges vertices "closer to each other than a certain distance", per the Clean Up manual page. Run it on a joined mesh where an arm touches the body, and the arm's vertices weld to the body's.

So:

  1. Select one part, Tab into Edit Mode, select all, and run Mesh ‣ Clean Up ‣ Merge by Distance with a small distance.
  2. Recalculate normals (Mesh ‣ Normals ‣ Recalculate Outside).
  3. Make that part watertight. The free 3D Print Toolbox extension checks for bad geometry and has Make Manifold; make an AI model watertight for printing goes deeper.
  4. Repeat for the next part.

If you must join parts into one object for export, do the clean-up before joining. Join (Ctrl-J) moves objects into one, but their surfaces stay disconnected until something welds them.

Step 4: check for touching and intersecting parts

Parts that look separate can still overlap by a fraction of a millimetre. In Edit Mode with Solid shading, open Overlays ‣ Mesh Analysis ‣ Intersections. Blender's mesh analysis page notes that intersecting surfaces are a common printing problem because the inside and outside "cannot be reliably detected". Run it on a joined copy to see where parts collide.

Fixes:

  • Move parts apart for printing. Assembled positions don't matter if you'll glue or snap them together later.
  • Trim the overlap where a part sinks into another, so the joint is a clean contact surface or a peg and hole.
  • Use the Thickness mode in the same menu to spot walls too thin to print.

Step 5: export

Pick one of these:

  • One STL per part. Select all parts and File ‣ Export ‣ STL (.stl) with Batch on. The STL manual page says Batch exports "each object as a separate STL file". Load them into the slicer together.
  • One STL with several shells. Select the parts, export with Selection Only, Batch off. In PrusaSlicer or Bambu Studio, select the model and click Split to objects. Bambu's wiki says each disconnected shell becomes its own object and is placed on the bed.
  • One 3MF. Use this if your slicer reads it and you want one tidy file with each part named. Prusa notes 3MF loads each object as a separate entity.

Check scale on export. If the model was 0.1 m tall in Blender, the slicer may read it as 0.1 mm; see scale a 3D model for printing.

Split to objects or split to parts?

Both slicers offer two commands, and they're not the same:

  • Split to objects. Each shell becomes an independent object on the bed. Use it for parts you print and assemble later.
  • Split to parts. Shells stay grouped as parts of one object, in their original positions. Prusa says it's usually used for multi-material models; Bambu says it's for assigning different filaments to parts in one print.

One warning from Prusa's support staff in the article's comments: the slicer splits by the meshes it detects, and the number "can't be managed in the slicer". If a part is broken into hundreds of tiny shells, Split to objects gives you hundreds of objects. Fix that in Blender first.

When not to keep parts separate

If two parts must be one rigid piece (a handle on a mug), separate shells that merely touch print weakly or not at all. Join them properly by modelling a connection, or keep them as one closed mesh from the start. And if the "parts" are only colour regions, splitting geometry is the wrong tool; paint colours in the slicer instead, as described in multicolour prints from AI models.

Where Vi3W fits

Vi3W generates textured models from text, sketches or images and exports GLB, FBX or OBJ, which you bring into Blender for the steps above. It isn't a slicer and doesn't export STL or 3MF, and it doesn't split a model into printable parts for you. If you want a simple single-piece print, generating the object as one compact shape avoids the multi-part problem entirely. Try Vi3W.

Frequently asked questions

how do i convert a glb with multiple separate parts into a single printable stl without accidentally merging pieces that should stay separate?

Treat each part separately until the last step. In Blender, import the GLB, apply transforms, run clean-up on one part at a time, and make sure parts don't touch or intersect. Then export one STL per part with the STL exporter's Batch option, or select all parts and export one STL that contains several separate shells, which slicers like PrusaSlicer and Bambu Studio can split back into objects.

Last reviewed