Vi3W
Skip to content

Guides

Blender for 3D printing: how to prepare and export printable models

Blender 3D printing guide: millimetre units, real scale, watertight meshes, the 3D-Print Toolbox extension, thickness and STL export.

2 min read

A 3D printer nozzle printing a small grey dragon figurine, with a translucent ghost of the full model above
Illustration. A printable model is solid, watertight and the right size.

Quick answer

Is Blender good for 3D printing?

Yes, especially for figures, sculptures and decorative prints. Set the scene units to millimetres, model or import at real size, make the mesh watertight, check wall thickness and overhangs with the 3D-Print Toolbox extension, and export STL from File, Export. For precise mechanical parts, a CAD tool is usually better.

Set up for printing

  1. Units: Scene Properties ‣ Units ‣ Length: Millimetres. Many people also set Unit Scale to 0.001 so one grid unit equals 1 mm.
  2. Real size: check Dimensions in the N panel; scale to the size you'll print; Ctrl+A ‣ Scale.
  3. Install the 3D-Print Toolbox: an extension on extensions.blender.org. Use Edit ‣ Preferences ‣ Get Extensions (with Allow Online Access on), then open it from the N sidebar.
Video: Getting Started With 3D Printing in Blender, by MrTriPie (YouTube)

What makes a mesh printable

  • Watertight (manifold): no holes, no loose edges, no faces inside faces. See Blender make manifold.
  • Thick enough: walls above your printer's minimum (often around 1 mm for FDM, check your printer).
  • Normals outward: see flip normals.
  • A flat base, and overhangs your printer can handle or supports for.
A cracked hollow grey sphere with an open hole
Illustration. Slicers need a closed surface; holes like this cause failed prints.

The 3D-Print Toolbox checks

  • Solid: finds non-manifold edges.
  • Intersections, Degenerate, Distorted faces.
  • Thickness: walls thinner than a value you set.
  • Edge Sharp and Overhang.
  • Clean Up ‣ Make Manifold attempts automatic repair.

Repairing messy meshes

For scans, sculpts and AI-generated models, the fastest fix is often a Voxel remesh (Properties ‣ Data ‣ Remesh). The Blender manual recommends it for cleaning up a mesh for 3D printing: it rebuilds a closed surface with no self-intersections. Use a small voxel size to keep detail.

Export

File ‣ Export ‣ Stl (.stl), with Selection Only if needed and scale checked. Then slice and preview layer by layer before printing.

Blender or CAD?

For figures and art, Blender. For parts that must fit, CAD. See Blender vs Fusion 360 for 3D printing.

Printable figures from photos or prompts

Vi3W turns a prompt, photo or sketch into a 3D model you export as OBJ or GLB, then remesh and export STL in Blender. See text to 3D print and scale a 3D model for printing. Try Vi3W.

Frequently asked questions

blender settings for 3d printing

Scene Properties, Units: Length in millimetres (and Unit Scale 0.001 if you want 1 Blender unit to equal 1 mm). Apply scale before export.

blender 3d printing toolbox

It's an extension on extensions.blender.org. Install it via Get Extensions, then find it in the sidebar's 3D-Print tab. It checks for non-manifold geometry, thickness and overhangs, and can make a mesh manifold.

blender 3d print toolbox not showing

Since Blender 4.2 it's no longer bundled. Install it from Get Extensions (Allow Online Access must be on), enable it, then press N in the 3D Viewport.

Last reviewed