Vi3W
Skip to content

Guides

3D Gaussian splatting for Blender: importing, rendering and converting splats in 5.3

Blender 5.3 imports PLY and SPZ Gaussian splats and renders them in EEVEE and Cycles. How to bring splats in, the add-ons, and turning splats into meshes.

5 min read

A brass lantern split down the middle: the left half a cloud of glowing soft splats, the right half solid geometry with a blue wireframe
Illustration. Blender 5.3 can show you the left half. Getting to the right half is still a separate step.

Quick answer

Can Blender open 3D Gaussian splats?

Yes, natively, from Blender 5.3, released on November 10, 2026. It imports splats from PLY and SPZ files, stores them as point clouds with a new splat type, processes them in Geometry Nodes, and renders them in Workbench, EEVEE and Cycles. It can't export splats yet, and it can't turn them into a mesh on its own.

At a glance

Ways to work with splats in Blender, from each vendor's own pages and the Blender 5.3 release notes, checked November 21, 2026.
OptionWhat it doesCostSplat export
Blender 5.3 (built in)Imports PLY and SPZ splats as point clouds; renders in Workbench, EEVEE and CyclesFreeNot yet
3DGS Render by KIRI Engine (add-on)Rendering splats; v5.0 animates them through a proxy meshcheckcheck
Splat Prep (add-on)Prepares splats in Blender 5.3$19 (check)PLY, compressed PLY, SPZ, .splat
KIRI Engine 3DGS to MeshConverts a splat scan into a mesh in the KIRI appPro, $79.99/yrn/a (outputs a mesh)
World Labs MarbleExports generated worlds as splats or meshesStandard or Pro plan; price checkSPZ/PLY (Standard); textured GLB (Pro)

Blender 5.3 changed this page

Until November 2026, getting a Gaussian splat into Blender meant an add-on and some patience. Blender 5.3, released on November 10, 2026, supports splats natively. According to the 5.3 release notes, it:

  • imports 3D Gaussian splats from PLY and SPZ files (SPZ up to version 4);
  • stores them as point clouds with a new "3D Gaussian Splats" type;
  • processes them in Geometry Nodes, with new Set Point Cloud Type and Import SPZ nodes, while the Import PLY node auto-detects splats;
  • renders them in Workbench, EEVEE and Cycles;
  • can also bring splats in through the glTF and USD importers.

What it doesn't do yet: export splats, or convert them to a mesh.

If splats are new to you, read 3D Gaussian splatting explained first.

Getting a splat into Blender

  1. Make or find a splat. Capture one with an app such as Scaniverse, which exports PLY and SPZ, or Postshot on a paid plan. Or export one from World Labs Marble on Standard. A video can be a source too: see video to 3D with AI.
  2. Update to Blender 5.3 or newer. Older versions don't have the native splat type.
  3. Import the file. A splat PLY goes through Blender's PLY import, which detects that it's a splat. For SPZ, Geometry Nodes has an Import SPZ node. Check the 5.3 manual for the menu entries in your build.
  4. Check the scale and orientation. A capture isn't guaranteed to arrive the right way up or at real-world scale. Rotate and scale the object before you build anything around it.
  5. Render. EEVEE gives you quick previews. Cycles lets the splat sit in a scene lit alongside ordinary meshes.

The same path works for Meta's SAM 3D Objects, whose default demo saves its result as a splat PLY.

A clay rocket on a turntable surrounded by floating cards for chat, painting and modelling
Illustration. Splats are one more kind of input Blender can now take alongside meshes and textures.

What you can do with a splat in Blender

Composite it with meshes. A captured street as a splat backdrop, with modelled props in front. This is where native rendering in Cycles and EEVEE earns its keep.

Process it in Geometry Nodes. Because a splat is a point cloud, you can select, delete or transform points procedurally, for example to cut away a messy floor or an unwanted passer-by.

Animate it, with an add-on. KIRI Engine's 3DGS Render add-on (version 5.0, June 2026, sold on Superhive) animates splats by driving them with a proxy mesh.

Export it, with an add-on. Splat Prep, built for Blender 5.3, exports PLY, compressed PLY, SPZ and .splat. It's listed at $19, but check the current price.

What you can't easily do is the work a mesh is for. A splat has no edges to bevel, no UVs to paint and no surface to rig. Physics and collisions want real geometry too.

A simple splat-backdrop scene

A common use is a photoreal captured place behind modelled foreground objects. A basic version looks like this:

  1. Import the splat and set its scale and orientation against a known object, such as a one-metre cube.
  2. Add a plane or a simple mesh where the floor is, so props have something to sit on and cast shadows onto.
  3. Import your props as normal meshes (GLB, FBX or OBJ) and place them.
  4. Light the props to match the light baked into the splat. A splat carries its captured lighting, so match the sun direction by eye.
  5. Render in Cycles for the final, and use EEVEE while you lay out the shot.

If the splat has junk at its edges, such as floaters or the sky blurring into the ground, trim those points in Geometry Nodes or clean the file in the free SuperSplat editor before import.

Turning a splat into a mesh

Blender 5.3 can't do this natively, so the conversion happens somewhere else:

  • KIRI Engine's 3DGS to Mesh, a Pro feature ($79.99 a year), with version 3.0 since April 2026. Import the resulting OBJ, FBX or GLB as normal.
  • World Labs Marble, for generated worlds: a collider mesh on Standard, and a high-quality textured GLB on Pro. The GLB import guide covers bringing that in.
  • Research code: 2D Gaussian Splatting (SIGGRAPH 2024) is still maintained, while SuGaR has been idle since 2024.

Whichever you use, the mesh will be an approximation of what the splat showed, and usually dense and messy. Plan on retopology before you animate or print it. The Gaussian splatting vs meshes guide explains why the two never convert perfectly.

Using splats from AI tools

Not every splat comes from a camera. World Labs Marble exports generated worlds as SPZ or PLY on its Standard plan, and Meta's SAM 3D Objects saves a single-image reconstruction as a splat PLY by default (it needs a Linux machine with a 32 GB NVIDIA GPU). Both import the same way as a captured splat. Treat them as backdrops and references rather than editable assets, for the same reasons.

Sometimes you only scanned a whole room to get one chair out of it. In that case it's often faster to skip the splat and make the chair as a mesh. Vi3W doesn't make, edit or convert splats, and it has no Blender add-on. It makes meshes from a photo, a sketch or text, across 25 image-to-3D models, and you download them as GLB, FBX, OBJ, STL, PLY or glTF to import into Blender. Clean shape rebuilds the mesh at 500 to 20,000 faces with the textures baked on, and Add bones rigs it if it needs to move.

Pair the splat with real props

Keep the splat for the backdrop, and make the props you'll edit as meshes in Vi3W. Try Vi3W.

Frequently asked questions

3d gaussian splatting for blender

Use Blender 5.3 or newer, which imports PLY and SPZ splats and renders them in all three engines. On older versions you need a third-party add-on, such as KIRI's 3DGS Render (check which versions it supports). Splat export still needs an add-on such as Splat Prep, because Blender 5.3 doesn't export splats.

3d gaussian splatting to mesh

Blender can't do it natively. Use KIRI Engine's 3DGS to Mesh (Pro), export a mesh from the tool that made the splat (Marble does on paid plans), or try research methods like 2D Gaussian Splatting. Expect an approximate surface that needs cleanup.

3d gaussian splatting to point cloud

In Blender 5.3 an imported splat already is a point cloud, with the type set to "3D Gaussian Splats". The Set Point Cloud Type node in Geometry Nodes switches the type, so you can treat the splat's points like any other point cloud.

Last reviewed